Canon XEED SX6000 - Manual (Page 197)

197
Replacing the Lamp
Installation Manual
Maintenance
3
Loosen the 3 screws on the inside of the lamp unit, then slowly pull out the lamp unit in
the direction of the arrow.
Even when the screws are loosened, they will not fall off the lamp unit.
4
Fully insert a new lamp unit and secure it with the 3 screws.
5
Close the lamp cover and tighten the screws.
6
Turn on the power. Bring up the menu and select [System settings] - [Other settings] -
[Lamp counter].
(The screen is for the WUX5000 / WUX4000.)