Configuring the network from the computer – Canon XEED SX6000 User Manual

Page 178

Advertising
background image

Configuring the Network From the Computer

178

The following information is displayed.

*1 WUX5000 / WX6000 / SX6000
*2 WUX4000

4

To configure, click [Settings].
The settings window appears.

Projector name

The name of the projector on the network

Location

The location of projector installation

MAC address

The MAC address of the projector

IP address

The IP address of the projector

Power Status

The power status of the projector

Lamp Time *1

Lamp operating time

Lamp Time Normal Mode *2

Lamp operating time in [Normal] lamp mode

Lamp Time Quiet Mode *2

Lamp operating time in [Quiet] lamp mode

Lamp Time Converted *2

Lamp operating time (converted value)

Filter Time

Air filter operating time

Alert

Error message (if an error has occurred)

Temperature abnormality
Faulty lamp
Faulty lamp cover
Faulty cooling fan
Faulty power supply
Faulty lens connector: Lens connector error
Faulty air filter unit: Air filter error
Unknown error

To operate the projector from the computer, click [Projector control] (

P188

).

Advertising