Canon XEED SX6000 - Manual (Page 237)

237
Menu Configuration
Install settings Menu
*1 - *5: Factory default settings are set according to the
following conditions.
*1: • For Analog PC-1/2, Digital PC or HDMI (when
[HDMI In] is [Computer]), the factory default is
[Off].
• For Component, and HDMI (when [HDMI In] is
[Auto]), the factory default is [On].
*2: • For HDMI (when [HDMI In] is [Auto]), the factory
default is [Off].
• For Component, the factory default is [Weak].
*3: • For HDMI (when [HDMI In] is [Computer]), Digi-
tal PC or Analog PC-1/2, if any image mode is
used except [VividPhoto], the factory default is
[Off]. If [VividPhoto] is used, the factory default
is [Middle].
• For HDMI (when [HDMI In] is [Auto]) or Compo-
nent, the factory default is [Weak], regardless of
the image mode.
*4: • SX6000
*5: • WX6000
Positional lock Off * P139
On
Test pattern Off * P138
On
Screen aspect 16:10 *5 P107
16:9
4:3 *4
16:10 D. image shift
(SX6000)
16: 9 D. image shift
4:3 D. image shift
(WX6000)
Keystone adjustment Keystone adjustment P108
Digital image shift D. image shift adjustment P108
Image flip H/V None* P104
Ceiling mounted
Rear
Rear, Ceiling mounted
Lens shift reset Lens shift reset P131
Audio in terminal select
HDMI Off P139
Audio in 1
Audio in 2
HDMI *
Digital PC Off P139
Audio in 1
Audio in 2 *
Analog PC-1 Off P139
Audio in 1 *
Audio in 2
Analog PC-2 Off P139
Audio in 1
Audio in 2 *
Component Off P139
Audio in 1 *
Audio in 2
Screen color Normal * P103
Greenboard
Adjust
On screen
Menu position P102
Guide Off P126
On *
Show input status Off P127
On *
Overheat warning display Off * P133
On
Menu display time Normal * P132
Extended
Lamp warning display Off P135
On *
Filter warning display Off P137
On *