Setting up the projector, Positioning the projector in front of the screen, P156 – Canon XEED SX6000 User Manual

Page 156: R to

Advertising
background image

156

Setting Up the Projector

Positioning the Projector in Front of the Screen

Place the projector in front of the screen.

Relationship Between Image Size and Projecting Distance

The projected image size is determined by the distance between the projector and the
screen (projection distance) as well as the zoom. Refer to the following table and decide
the distance between the projector and screen.

• Be sure to place the projector parallel

to the screen to ensure distortion-free
projection.

• The screen must not be exposed to

direct sunlight or light from lighting
equipment. In a bright room, it is rec-
ommended that lights be turned off,
curtains be drawn, and other steps
taken to make the screen easier to see.

• H1 and H2 are the distances when lens shift is the default value below.
• Standard Zoom Lens / Long Zoom Lens / Ultra Long Zoom Lens:

+50% (up / down), 0% (left / right)
Short Fixed Lens: 0% (up / down / left / right)

Optical axis

Screen

16:9/16:10

Optical axis when pro-
jection is perpendicu-
lar to screen

Screen

H2

H1

Height

Height

Width

Width

16:9 / 16:10

Screen size

(diagonal)

4:3

Advertising