Canon XEED SX6000 - Manual (Page 120)

120
Setting Various Functions
Selecting the Power Man-
agement Mode
[Power management mode]
You can turn off the lamp or projector auto-
matically in order to save power when the
projector is not in use.
MENU > [System settings] > [Power manage-
ment mode]
MENU > [System settings] > [Power manage-
ment mode]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [Off] is the factory default.
• During standby mode, the [POWER ON]
indicator and [STAND BY] indicator flash
alternately.
• You cannot enable the [Direct power on]
function (see the next item), if you select
[Off].
HDMI Component
Digital PC Analog PC
Off Disables the power management
mode.
Standby If no input signal is received for 30
seconds, the countdown will be dis-
played and after 5 minutes, the
lamp will turn off.
If it receives an input signal or is
operated during this period, it
resumes projection.
Exit If no input signal is received for 30
seconds, it displays the countdown
and turns off the projector after 5
minutes.