Canon XEED SX6000 - Manual (Page 171)

171
Installation Manual
Connecting to a Networ
k
Network Settings on the Projector
From the projector menus screen, network
settings can be configured in the [Network
Setting] tab. For the menu operations,
refer to
page 88 .
(The screen is for the WUX5000 /
WUX4000.)
Locking the Network Settings
You can lock / unlock the network settings
so that they cannot be changed and cancel
the lock.
MENU > [Network Setting] > [Network Setting
lock]
After the OK button is pressed to accept
your setting and the MENU button or the
EXIT button (WUX6000 / SX6000) is
pressed to close the window, the lock is
re-engaged. If you change the network
settings, be sure to continue operating
without closing the window.
• [Lock] is the factory default.
• For the default network password, refer to
page 173 .
Unlock Cancels the lock and allows
other network settings to be
changed. The password must
be entered in order to cancel the
lock.
When [Unlock] is selected, the
window shown below appears.
Use the [ ] / [ ] / [ ] / [ ] but-
tons to enter the 4-digit pass-
word.
For the WX6000 / SX6000, num-
bers can be entered using the
numerical buttons on the remote
control.
Lock Lock the settings.