Error mail – Canon XEED SX6000 User Manual

Page 190

Advertising
background image

190

Error Mail

The messages shown in the following error list are sent when an error occurs in the pro-
jector.

Error list

* For details, contact the Canon Customer Support Center.

Errors related to
temperature

Error

name

Temperature abnormality

Text

The temperature inside the projector is too high for some reason or the
outside air temperature is higher than the specified one.
If the problem is inside the projector, check whether the projector is
installed and operated normally, turn off the projector to cool its inside,
and retry projection. If the same warning occurs again, the projector
may be defective. Contact your dealer.

Errors related to
the lamp

Error

name

Faulty lamp

Text

The lamp has burnt out. Replace the lamp with a new one. If the same
warning occurs again, the lamp drive circuit may be defective. Con-
tact your dealer.

Errors related to
the lamp cover

Error

name

Faulty lamp cover

Text

The lamp cover is open. Check whether the lamp cover is installed
properly. If it is installed properly, the lamp cover detection switch may
be defective. Contact your dealer.

Errors related to
the cooling fan

Error

name

Faulty cooling fan

Text

The cooling fan or another component may be defective. Contact your
dealer.

Errors related to
the power supply

Error

name

Faulty power supply

Text

The voltage of part of the power supply is abnormally high or any
other problem has occurred in the power supply. Contact your dealer.

Errors related to
the lens connec-
tor

Error

name

Faulty lens connector

Text

The lens cable is not connected to the lens unit. Check whether the
lens cable is connected to the lens unit properly.
If it is connected properly, the lens connector or cable may be defec-
tive. Contact your dealer.

Errors related to
the air filter

Error

name

Faulty air filter unit

Text

The air filter unit is not installed properly.
Check whether the air filter unit is installed properly.
If it is installed properly, the air filter unit detection switch may be
defective. Contact your dealer.

Other types of
errors

Error

name

Unknown Error

Text

Code in hexadecimal numbers*

Advertising