Input terminal, Part names – Canon XEED SX6000 User Manual
Page 40
Part Names
40
Input Terminal
(1)LAN port (
Connects the LAN cable.
Used to connect the projector to a network.
(2)ANALOG PC / COMPONENT IN terminal
(
/COMPONENT IN) (
Receives the analog PC signal (Analog PC).
A component cable can be used to receive the component image signal (Component).
(3)DVI-D IN terminal (
DVI-D IN) (
)
Connects the external monitor output from a computer.
Receives the digital signal (Digital PC).
(4)HDMI IN terminal (HDMI IN) (
)
Receives the digital content image signal (HDMI).
Carries both video and audio signals across a single cable.
(5)Service port (CONTROL)
This terminal is used by servicing technicians. It is not used during ordinary use.
(6)AUDIO IN terminal (AUDIO IN) (
)
Receives the audio input corresponding to 2 image input systems other than HDMI IN.
The internal speaker outputs the audio for the selected image signal.
(7)AUDIO OUT terminal ( AUDIO OUT) (
)
Outputs the audio to external AV equipment. This outputs the audio signal that corre-
sponds to the projected image signal.
(1)
(2)
(3)
(4)
(5)
(6)
(7)