Canon VB-M700F - Manual (Page 35)

Installation
35
S
et
u
p
2
Note
• You can click [Change] to change the destination folder.
However, we recommend that you do not change the
destination.
• To check the available disk space on each drive of the
computer and the disk space required for installation, click
[Space].
• A dialog box asking you to specify the software to be
installed is displayed. If you click [Complete], proceed to the
step 6. If you click [Custom], the sample dialog box above is
displayed. Select which application to install, the Storage
Server or the Viewer. Click the application that you do not want
to install and select [This feature will not be available].
Note
• The IP address you set during installation can be changed
using the command line. See “Changing the Storage Server IP
Address” (p. 130) for details.
• When installing on a computer that has multiple network
interfaces, select the network interface to use in the [Network
adapter] list and the assigned IP address in the [IP address]
list.
• If you clear the [Add storage server programs to the Windows
Firewall exception list.] check box, you need to configure
Windows Firewall after the installation is complete. For details,
see “Windows Firewall Settings” (p. 37).
An icon appears on your desktop when the installation is
complete.
5 Click [Next].
6 Click [Next].
7 Click [Install].
8 Click [Finish].
9 Click [Yes] to restart the computer.
Important
• You must restart the computer to enable the settings that
were made during the installation.
• You must configure the operating system after installation.
For details, see “Settings After Installation” (p. 37).
• If you reinstall this software after uninstalling it, the setting
configurations before uninstallation will not be retained.