Canon VB-M700F - Manual (Page 81)

Record on a Regular Basis (Repeating Weekly Schedules)
81
S
et
ting a
Recor
d
ing
S
chedule
5
The other settings are the same as those for continuous
recording. For details, see “Continuous Recording
Settings” (p. 78).
The [Camera] option in [Detect Motion Using] cannot be
selected.
To use motion detection, you must create a schedule with
motion detection using the camera’s schedule setting
tool.
Note
• If the camera supports four motion detection areas, tabs
named [Area 1] through [Area 4] are displayed in the
recording settings area. You can specify settings individually
for each motion detection area.
• The [Area Name] box displays the name of the area that is
registered in the camera.
• To use a camera for motion detection, you must configure the
motion detection settings on the camera. For details, see the
camera manual.
• When using the camera for motion detection with more than
one motion detection area, you can specify the event priority
for each area.
• Motion detection is suspended when the camera is panning,
tilting or zooming, irrespective of the motion detection settings.
• If motion is detected in multiple motion detection areas that
have the same priority, recording will start with the area having
the lowest number.
Using the Storage Server for Motion Detection
Note
If you select [MPEG-4] or [H.264] in [Video Format], the [Storage
Server] option in [Detect Motion Using] cannot be selected. Note
also that if you select [MPEG-4] or [H.264] in other recording
modes besides motion detection recording, the [Storage Server]
option still cannot be selected.
[Recording Settings] tab
(1) [Priority]
Select the priority of the motion detection events. For
details, see “Check Events” (p. 105).
The other settings are the same as those for continuous
recording. For details, see “Continuous Recording
Settings” (p. 78).
Hint
You can use this setting to individually enable or disable
recording for each area. For example, you may want to record
when motion is detected around a vault, but not record when
motion is detected around an entrance.
[Settings] tab
(1) [Analysis Frame Rate]
Specify the motion detection frame rate (frames per
second).
Important
The load on the Storage Server CPU increases when motion
detection is performed on the Storage Server. We strongly
recommend that you use the motion detection on the camera, if
it is available.
1 Click [Motion Detection Recording] in the recording
mode list and select the check box.
2 Select [Storage Server] in [Detect Motion Using].
3 Configure the recorded video and event settings on the
[Recording Settings] tab.
4 Configure the motion detection settings on the
[Settings] tab.
(1)
(1)
(3)
(4)
(5)
(6)
(2)
(7)