Canon VB-M700F - Manual (Page 48)

48
Change the Destination of the Recording File
and the Maximum Disk Usage
Specify a drive for recording or change the maximum disk
usage.
Click [Do not limit] for each drive to display the
maximum disk usage. Select the [Maximum Disk
Space Used] check box and specify a maximum disk
usage that does not exceed the total disk capacity.
1 Select a Storage Server from the list of Storage
Servers.
2 Click [Edit] to display the [Storage Server Settings]
dialog box.
3 Clear the check boxes next to the drives that are not
used for recording.
4 Specify the maximum disk usage.
5 Click [OK] to close the dialog box.
Important
• We recommend that you do not specify the system drive
(typically the C drive) as the destination for the recording file.
• You cannot specify a drive that has a capacity of less than
1 GB.