P. 79), Sensor, Recording settings – Canon VB-M700F User Manual

Page 79: P. 79 and, Sensor recording settings

Advertising
background image

Record on a Regular Basis (Repeating Weekly Schedules)

79

S

et

ting a

Recor

d

ing

S

chedule

5

Note

• If you select [MPEG-4] or [H.264] for the [Video Format]

setting, the [Aspect Ratio] and [Maximum Frame Rate] settings

cannot be changed. The settings on the camera are used for

recording.

Only supports [JPEG] for the [Video Format].

• It may not be possible to record at the specified frame rate or

recording may pause intermittently, depending on the load on

the Storage Server CPU or the hard disk.

• Recording may be performed at lower than the specified frame

rate, depending on the number of Viewers that are accessing

the camera, the load on the camera and Storage Server,

variation in network traffic, and the environment at the time of
recording.

The maximum frame rate is 5 fps.

• Audio recording is enabled when the recording mode is

selected. You cannot schedule audio-only recording.

• If [MPEG-4] or [H.264] recording format is used, the recorded

audio will not be in sync with the recorded video. If [JPEG]
recording format is used, the recorded audio will be in sync

with the recorded video for the most part, however it is not

guaranteed that it will be completely in sync.

• Recording mode stream operates only with cameras that

support the recording mode stream function and if a stream
has been acquired.

• If an upload function is already being used on the camera, you

cannot use the recording-mode stream function. To use the

recording-mode stream function, select [Upload] > [Upload

Disabled] on the setting page of the camera.

• To use recording mode stream, select [Video Format] >

[JPEG], and set [Maximum Frame Rate] to “10” or lower value.

• When the recording-mode stream function is used, the

streamed video has a higher priority than the live video.
Depending on the load on the camera, such as the number of

Viewers that are simultaneously connected to the camera,

display of the live video may stop.

„ Sensor Recording Settings

(1) [Do not record]

Select to not record even when there is a signal from

this sensor.

Hint

You can individually enable or disable recording for each sensor.
For example, you may not want to record when there is door

sensor signal, but to start recording when there is a window

sensor signal.

(2) [Start Recording]

Start recording when there is a signal from the sensor.

After selecting the item, configure the recording

settings below the item.

(3) [Priority]

Select the event priority. For details, see “Check

Events” (p. 105).

(4) [Invert this event]

Start recording when the input from the sensor

disappears.

For example, start recording when there is no signal

from the sensor, and stop recording when a signal is

present.

• Even if the [Record audio if available] check box is selected,

audio will not be recorded if the audio sending function has

not been activated on the camera. If you schedule a
recording, make sure the audio sending function on the

camera has been set to [Enable].

1

Click [Sensor Recording] in the recording mode list
and select the check box.

2

Configure the video and event settings.

(1)
(2)
(3)

(4)

Advertising
This manual is related to the following products: