Specify the recording mode, Specify advanced settings, Save the recording schedule – Canon VB-M700F User Manual

Page 77

Advertising
background image

Record on a Regular Basis (Repeating Weekly Schedules)

77

S

et

ting a

Recor

d

ing

S

chedule

5

Specify the Recording Mode

For example, if you want continuously record for the

entire duration of the recording schedule, select the

check box next to [Continuous Recording].

The settings are different for each recording mode.

• Continuous recording

Records continuously for the specified recording

period. For details, see “Continuous Recording

Settings” (p. 78).

• Sensor recording

Starts recording when there is a signal from a sensor

connected to the camera. For details, see “Sensor

Recording Settings (p. 79).

• Motion detection recording

Starts recording when motion is detected. For details,

see “Motion Detection Recording Settings” (p. 80).

• Intelligent function recording

Starts recording when motion that meets the intelligent

function detection criteria is detected. For details, see

“Intelligent Function Recording Settings” (p. 83).

• Volume detection recording

Starts recording when the volume detection criteria are

met. For details, see “Volume Detection Recording

Settings” (p. 83).

Intelligent function recording and volume detection

recording are not supported.

Note

• You can specify the priority of the events generated by sensor

recording, motion detection recording, intelligent function
recording and volume detection recording. For details, see

p. 79 and p. 80. When two events occur simultaneously, the

event with the higher priority takes precedence.

Only supports continuous recording mode.

Hint

You can specify more than one recording mode at the same time.
For example, you can select motion detection recording and

specify a frame rate that is higher than continuous recording. This

way, a high frame rate is used only when motion is detected.

Specify Advanced Settings

Advanced settings are available when the [Advanced]

button is displayed in the recording settings area. For

details, see “Configure the Advanced Recording Settings”

(p. 84).

Save the Recording Schedule

The schedule that was set is displayed in the

schedule area. The schedule becomes active as soon

as it is displayed in the schedule area.

1

Select the check box next to the recording mode in the
list that best suits the type of recording you require.

2

Configure the recording mode settings in the recording
settings area.

1

Click [OK] to close the dialog box.

Advertising
This manual is related to the following products: