Canon VB-M700F - Manual (Page 76)

76
Set a Weekly Schedule
(1) Recording time settings area
Specify the day of the week and the start and end time
of the recording period.
(2) Recording mode list
Select the recording mode.
(3) Recording settings area
Configure the settings for the recording mode
selected in (2).
(4) [OK] and [Cancel]
Close the dialog box.
Specify the Recording Period and Day of the
Week
• To record for the entire day without specifying a
start and end time, click [All Day].
• To specify a recording period, enter the start time
in [Start Time] and the end time in [End Time]. Use
these items when you want to specify a recording
time that goes past midnight, such as when
recording late into the night. Alternatively, select a
duration for the recording (minimum of 15 min.) in
the [Duration] field.
If [Restrict Service Time] is enabled on the camera,
recording will take place only during the service time,
irrespective of the recording schedule.
Note
• You cannot specify overlapping recording schedules on the
same camera.
• The time of the recording schedules is based on the Storage
Server clock. We recommend that you synchronize the clocks
on all the Storage Server you are using.
• If you set the operating system to automatically handle daylight
saving time, the time will be automatically adjusted on the first
and last days of the daylight saving time period.
1 In the schedule area, click the camera that you want to
add the schedule to.
2 Click [Add Schedule Item] to display the [Edit Schedule
Item] dialog box.
(1)
(2) (3) (4)
1 Specify the recording period.
2 Select the check boxes for the days of the week on
which to repeat the recording in [Repeat On].
Important
To use one Storage Server with more than 32 cameras
connected to it, set the start time of the recording schedule
leaving 15-minute intervals or longer so that the recording
schedules of 33 or more cameras do not start at the same time.