P. 83), Intelligent function recording settings” (p. 83), Ee “volume detection recording – Canon VB-M700F User Manual

Page 83: Settings” (p. 83, Intelligent function recording settings, Volume detection recording settings

Advertising
background image

Record on a Regular Basis (Repeating Weekly Schedules)

83

S

et

ting a

Recor

d

ing

S

chedule

5

„ Intelligent Function Recording Settings

(1) [Do not record]

Do not record when the conditions for this rule are

met.

(2) [Start Recording]

Start recording when the conditions for this rule are

met. After selecting the item, configure the recording

settings below the item.

(3) [Priority]

Select the event priority. For details, see “Check

Events” (p. 105).

The other settings are the same as those for continuous

recording. For details, see “Continuous Recording

Settings” (p. 78).

This feature is not supported.

Note

• Tabs named [Rule 1] through [Rule 15] are displayed, as

shown. Each tab can be configured individually.

• The name of the rule is displayed in [Rule Name].

Hint

To use intelligent function recording, you must configure the

intelligent function recording settings on the camera. For details,
see the camera manual.

„ Volume Detection Recording Settings

(1) [Do not record]

Do not record when audio is detected.

(2) [Start Recording]

Start recording when audio is detected. After

selecting the item, configure the recording settings

below the item.

(3) [Priority]

Select the event priority. For details, see “Check

Events” (p. 105).

The other settings are the same as those for continuous

recording. For details, see “Continuous Recording

Settings” (p. 78).

This feature is not supported.

Hint

To use volume detection recording, you must first configure the

volume detection recording settings on the camera. For details,

see the camera manual.

1

Click [Intelligent Function Recording] in the recording
mode list and select the check box.

2

Configure the recording and event settings on each
rule tab.

Important

If the recording period for a schedule ends while intelligent

function recording is in progress, recording will stop.

(1)
(2)
(3)

1

Click [Volume Detection Recording] in the recording
mode list and select the check box.

2

Configure the recording and event settings.

Important

If the recording period for a schedule ends while volume

detection recording is in progress, recording will stop.

(1)
(2)
(3)

Advertising
This manual is related to the following products: