Canon VB-M700F - Manual (Page 104)

104
(5) [Use silence detection to reduce network traffic]
Select if you want to detect silent segments when
sending audio. Decreases the amount of data
transmitted during silent segments to decrease the
load on network bandwidth.
(6) [Settings]
Displays the [Silence Detection Settings] dialog box.
(7) Hide options button
Hides the options of the [Audio] panel.
Cannot send audio to the camera.
„ Silence Detection Settings
Select the [Use silence detection to reduce network
traffic] check box on the [Audio] panel to set the silence
detection sensitivity.
Click [Settings] to display the [Silence Detection Settings]
dialog box and adjust the silence detection sensitivity.
(1) [Use the default sensitivity settings]
Uses the default sensitivity for silence detection.
(2) [Set the sensitivity manually]
Drag the slider to set the detection sensitivity.
(3) [OK] and [Cancel]
Close the dialog box.
Compensate for Dark Regions in the Video
Use the viewer shade control to compensate for any dark
regions in the video.
• [Off]
Disable the shade control.
• [Low]/[Medium]/[High]/[Very High]
Enable the shade control. View the video window and
select a compensation value that gives the appropriate
brightness.
Note
• You cannot apply this feature to more than one video window.
• The viewer shade control is a feature of the Viewer, not the
camera. Therefore, it can be used for both live and recorded
video playback.
(1)
(3)
(2)
1 Click the video window menu button to display the
menu.
2 Click [Viewer Shade Control] and select the amount of
shade from the submenu.