Canon VB-M700F - Manual (Page 60)

60
(8) [Send notification when time is out-of-sync with the
storage server group]
Display a message if there is a time difference of 5
seconds or longer between the Storage Server and
the Viewer computer when connected to a Storage
Server Group.
Configure Event Notification and Priorities
(1) [Show Events in Live Events Log and Timeline]
Display an event in the [Live Events Log] dialog box
and on the timeline.
[Equal to or higher than]
Specify the priority of events to be displayed.
(2) [Show Video Window on Event]
Automatically display the camera’s video window
when an event occurs.
[Equal to or higher than]
Specify the priority of events for which a video window
is displayed.
(3) [Operator Notification]
Notify the operator that an event occurred.
[Equal to or higher than]
Specify the priority of events to be notified.
[Flash event indicator for]
Specify the time the event indicator flashes right after
the event occurs, from 1 to 99 seconds.
[Play audio alert]
Beep when an event occurs.
[Display event indicator during playback]
Display an event during playback.
(4) [Acknowledge Event]
Prompt the operator to acknowledge an event.
[Equal to or higher than]
Specify the priority of events to be acknowledged.
You cannot change the [Show Video Window on
Event], [Operator Notification], and [Acknowledge Event]
settings.
Configure the Display/Hide Mode for Each
Event
Specify the types of events displayed in the [Live Events
Log] dialog box and on the timeline.
Select an event to be displayed in the [Live Events
Log] dialog box and on the timeline.
1 Click the [Event Notification] tab.
2 Configure each item.
(1)
(2)
(3)
(4)
1 Click the [Event Display] tab.
2 Specify whether or not to display each type of event.