HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 116)

Working With the Core Switch 2/64
116 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Enabling a Blade
To enable a blade unit.
1. Log into the switch as the admin user.
2. Enter the sloton command with the following syntax the command line:
sloton slotnumber
where slotnumber is the slot number of the blade you want to enable.
Example
Powering On a Blade
To provide power to a blade:
1. Log into the switch as the admin user.
2. Enter the slotpoweron command with the following syntax the
command line:
slotpoweron slotnumber
where slotnumber is the slot number of the blade you want to power on.
Example
Powering Off a Blade
To power off a blade unit:
1. Log into the switch as the admin user.
2. Enter the slotoff command.
switch:admin> sloton 3
Slot 3 is being enabled
switch:admin>
switch:admin> slotpoweron 3
Powering on slot 3
switch:admin>