HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 180)

Diagnostics and Status
180 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
The output will appear different on a SAN Switch 2/32 switch. For more
information refer to the
switchshow command in the HP StorageWorks
Fabric OS Version 3.1.x/4.1.x Reference Guide.
Displaying the Uptime Of the Switch
To display the uptime for a switch:
1. Log into the switch as the admin user.
2. Enter the uptime command at the command line. This command displays
the length of time the system has been in operation, the total cumulative
amount of up-time since the system was first powered-on, the date and time of
the last reboot, and the reason for the last reboot. The reason for the last
switch reboot is also recorded in the error log.
The following example displays the uptime on a SAN Switch 2/16 using the
uptime command.
Example:
switch:admin> uptime
Up for: 1 day, 42 mins
Powered for: 167 days, 2:58
Last up at: Mon Sep 9 04:36:07 2002
Reason: Reboot
switch:admin>