Setting a domain id – HP StorageWorks MSA 2.8 SAN Switch User Manual
Page 48
Advertising
Basic Switch Management
48
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
If multicast alias groups exist, the following fields are shown:
Setting a Domain ID
1. Log into the switch.
2. Enter the
switchdisable
command to disable the switch.
3. Enter the
configure
command.
4. Enter “
Y
” after the
Fabric parameters
prompt:
Example:
5. Enter a unique Domain ID at the
Domain ID
prompt:
Example:
6. Complete the remaining prompts (or press Ctrl+D to accept the other settings
and exit).
7. Enter the
switchenable
command to re-enable the switch.
Group ID
The alias group number and D_ID.
Token
The alias group token (assigned by the N_Port).
Fabric parameters (yes, y, no, n): [no] y
Domain: (1..239) [1] 3
Advertising