HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 119)

Working With the Core Switch 2/64
119 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
For complete information about switch FRUs, refer to the Core Switch 2/64
installation guide (the installation guide is also available on the v3.1.x or v4.1.x
Software CD).
Displaying Information on Switch FRUs
To view switch FRU information for a switch:
1. Log into the switch as the admin user.
2. Enter the chassisshow command at the command line. This command
displays the field replaceable unit (FRU) header content for each object in the
chassis. This command returns information for each FRU including:
■ DISABLED
The blade is powered on but disabled.
■ FAULTY
The blade is faulty because an error was detected.
■ UNKNOWN
The blade is inserted but it’s state cannot be
determined.
switch:admin> slotshow
Slot Blade Type ID Status
---------------------------------
1 SW BLADE 2 ENABLED
2 UNKNOWN VACANT
3 SW BLADE 2 ENABLED
4 UNKNOWN VACANT
5 CP BLADE 1 ENABLED
6 CP BLADE 1 ENABLED
7 UNKNOWN VACANT
8 SW BLADE 2 ENABLED
9 SW BLADE 2 ENABLED
10 SW BLADE 2 ENABLED
switch:admin>