HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 31)

Initial Configuration
31 Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Verify Switch Function
To verify that your switch is operating correctly, display information about the
switch and port status.
To display information about the switch and port status:
1. Log into the switch as the admin user.
2. Enter the switchshow command at the command line. This command
displays a switch summary and a port summary.
The following example displays the switchshow command.
Example:
switch:admin> switchshow
switchName: switch
switchType: 16.2
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 7
switchId: fffc07
switchWwn: 10:00:00:60:69:c0:0e:88
switchBeacon: OFF
Zoning: ON (cfg1)
port 0: id N2 Online E-Port 10:00:00:60:69:c0:0f:04 "web189"
(upstream)
port 1: id N2 No_Light
port 2: id N2 No_Light
port 3: id N2 No_Light
port 4: id N2 No_Light
port 5: id N2 No_Light
port 6: id N2 No_Light
port 7: id N2 No_Light
switch:admin>