HP XP Racks - Manual (Page 35)

controller of an LU is CHA0, and access to the LU is made via only one path
(A). After that access path (A) is placed offline, the first choice for the
switching destination is the other path connected to CHA0 (B). If an error
also occurs on that path (B), then the next possibility for a path comes from
one of the two paths (C or D) connected to CHA1.
When the Lightning 9900V series, Hitachi USP series, Universal Storage
Platform V/VM series, Virtual Storage Platform series, Hitachi AMS2000
series
# , Hitachi SMS series, or HUS100 series # is being used, all the paths
are owner paths. This means all the paths accessing the same LU can be
possible switching destinations. For example, in Figure 2-8 Path switching on
page 2-15 , the LU is accessed using only the path (A). After the access path
is placed offline, the switching destination is one of the paths (B), (C), and
(D).
#
This storage system applies when the dynamic I/O path control function is
disabled.
For details on the priority for determining which of the paths to the same LU
is used as the switching destination, see Priority of Switching Destination
Paths on page 2-16 .
Figure 2-8 Path switching
HDLM Functions
2-15
Hitachi Dynamic Link Manager User Guide for AIX®