HP Storage Mirroring Software - Manual (Page 100)

Storage Mirroring Console Page 99 of 677
Setting the console communications port
To access the console communications port, select Options from the toolbar. On the
Options page, Default port specifies the port that the console will use when sending
and receiving data to Storage Mirroring servers. By default, the port is 6325. Changes to
the console port will not take effect until the console is restarted.
Note: If you are using an older Storage Mirroring version, you will need to use the
legacy protocol port. This applies to Storage Mirroring versions 5.1 or earlier.