HP Storage Mirroring Software - Manual (Page 155)

Workload protection Page 154 of 677
Configuring failover monitoring
1. Open the Failover Control Center from your target server or a client machine. Do
not run the Failover Control Center from your source server.
2. Click Add Target and enter a name or IP address (with or without a port number)
of your failover target.
3. Click OK.
4. Click Login to login to the selected target.
5. Select a source machine to monitor by clicking Add Monitor. The Insert Source
Machine dialog box appears in front of the Monitor Settings dialog box.
6. On the Insert Source Machine dialog, specify your source machine by any of the
following methods.
l
Type the name of the machine that you want to monitor in Machine Name(s)
and click OK.
l
Click Browse to search for a machine. Select a domain from the list box at
the top of the Select Machine dialog box to list the available machines for that
domain. Highlight a source to be monitored and click OK.
l
Click Custom. Enter the name of the server and click Add. Specify the IP
address and subnet mask of the specified server and click OK. Click OK
again.
The Insert Source Machine dialog closes and the Monitor Settings dialog
remains open with your source listed in the Names to Monitor tree.
7. In the Names to Monitor tree, locate and select the IP addresses on the source
that you want to monitor.
8. Highlight an IP address that you have selected for monitoring and select a Target
Adapter that will assume that IP address during failover. Repeat this process for
each IP address that is being monitored. Current IP Addresses displays the IP
address(es) currently assigned to the selected target adapter.