HP Storage Mirroring Software - Manual (Page 525)

Failback and restore Page 524 of 677
Restoring then failing back virtual workloads
1. Open the console you used to establish protection.
2. On the Monitor Connections or Monitor protections page (depending on your
console), select the connection that you want to restore and failback.
3. Click Reverse Protection in the toolbar. The flow of mirroring and replication data
will change. Data will be transmitted from the replica virtual machine on the target
back to the source.
4. After mirroring is complete and you are ready to failback, perform the failover
process again. This process will act as a failback. Once the failover is complete,
you will be back to your original source.