HP Storage Mirroring Software - Manual (Page 285)

Workload protection Page 284 of 677
l
Source VirtualCenter server—Select the VirtualCenter server that
administrators the virtual machine you want to protect. If you are not using
VirtualCenter, select None.
l
Virtual machine to protect—Specify the name of the virtual server you want
to protect. You can click Browse to select a server from a network drill-down
list or to search for a server. Once you have specified a virtual server to
protect, the IP address or DNS of the ESX server will be displayed.
Note: Each protection job applies to a single virtual machine.
Virtual machines using ESX raw or independent disks are not
supported.
If your virtual machine is configured to use thin (sparse disks), the
replica on the target will not be a thin disk. Make sure there is
adequate space on the target.
The virtual machine name cannot contain any of the following special
characters.
# / \ : * ? ' " < > |