HP Storage Mirroring Software - Manual (Page 538)

Connections Page 537 of 677
Disconnecting a connection
To disconnect a Storage Mirroring Recover connection, open the Replication Console ,
and right-click the connection on the right pane of the Replication Console. Select
Disconnect. The source and target will be disconnected.
Note: If a connection is disconnected and the target is monitoring the source for failover,
you will be prompted if you would like to continue monitoring for a failure. If you
select Yes, the Storage Mirroring Recover connection will be disconnected, but
the target will continue monitoring the source. To make modifications to the
failure monitoring, you will need to use the Failover Control Center. If you select
No, the Storage Mirroring Recover connection will be disconnected, and the
source will no longer be monitored for failure by the target.
If a connection is disconnected while large amounts of data still remain in queue,
the Replication Console may become unresponsive while the data is being
flushed. The Replication Console will respond when all of the data has been
flushed from the queue.