HP Storage Mirroring Software - Manual (Page 234)

Workload protection Page 233 of 677
Configuring Exchange storage group protection
If you are protecting Exchange, you can specify which storage groups, mailboxes, and
public folder stores that you want to protect.
1. Make sure you have a valid domain and servers specified, click Configure from
the main Application Manager page, and then select the Connection tab.
Note: The fields on the Connection tab will vary depending on the type of
application you are protecting.
2. The Protected Storage Groups will list the storage groups, mailboxes, and public
folder stores. By default everything is slected. Select the storage groups that you
want to protect. By selecting individual storage groups, you can reduce the amount
of data being replicated and filter out storage groups that do not need to be
protected or failed over. Only the users associated with the selected storage
groups will be failed over.
Note: If you do not select all storage groups, you should make sure that other
backups are available.
Ideally, you should place all query-based distribution groups in a single
organization container and give the target server full control to the container
and all child objects.
Names with a plus sign (+) are not supported. You must rename the storage
group and remove the plus sign.