HP 3PAR Application Software Suite for Microsoft Exchange Licenses - Manual (Page 111)

Table 6 HP 3PAR Recovery Manager Software for Microsoft Exchange Event Messages (continued)
Description/Action Error Message Event ID
You must install the Symantec NetBackup client to perform backups
using NetBackup.
•
To set up Symantec NetBackup, see Chapter 5, “Configuring Backup
Software.”
RME5526: ERROR: Recovery
Manager for Exchange does not
support this particular
NetBackup model. 5526
NetBackup does not appear to be installed on the specified host.
• Verify that the NetBackup client is installed correctly on the backup
client <host name>.
RME5528: ERROR: Check
NetBackup client installation on
<host name>. 5528
Installation files might be corrupted or missing. omnib.exe does not
seem to exist. RME5531: ERROR: Check Data
Protector client installation on
<host name>. 5531
• Verify that the Data Protector client is installed correctly on the backup
client <host name>.
•
Verify that the correct omnidl patch for Data Protector is installed.
omnidl.exe does not appear to exist. RME5530: ERROR: Check Data
Protector client installation on 5530
•
Verify that the Data Protector client is installed correctly on the backup
client.
<host name>. Could not find file
<Data Protector Home> \\bin\
\utilns\\omnidl.exe
.
• Verify that the correct omnidl patch is installed for Data Protector.
111