HP 3PAR Application Software Suite for Microsoft Exchange Licenses - Manual (Page 23)

4 Configuring Recovery Manager
Configuring the Database
•
Be sure to use Exchange files created on basic disks using the NTFS file system. Recovery
Manger does not support other types of file systems.
•
Maintain a 1:1 relationship between mailbox databases and volumes:
Do not add more than one mailbox database plus its data files to a volume. ◦
◦ Do not add files from one database (including its data files) to multiple volumes.
◦ Do not store non-Exchange data on volumes that store Exchange data files.
CAUTION: Be sure to maintain a one mailbox database:one volume relationship.
•
If you add multiple mailbox databases to one volume, backup and disaster recovery operations
on one mailbox database can result in conflicts between the databases in the volume.
•
If you disperse files from one mailbox database among volumes, backup and disaster recovery
operations on the mailbox database will not back up or restore all the files related to that
database.
Configuring Recovery Manager
Installation Location
By default Recovery Manager installs in %SystemDrive%\Program Files\3PAR\RM\Exchange
Search Path
The Recovery Manager executables are stored in the directory you specify during installation.
Recovery Manager automatically adds the specified directory to the Windows environment variable
PATH
; you can therefore issue Recovery Manager CLI commands from any directory.
Changing the Recovery Manager TCP/IP Port
The Recovery Manager listening service on each Recovery Manager Agent component installed
on the mailbox server and Recovery Manager backup server communicates through a TCP/IP port.
By default, Recovery Manager communications use port 9933. If port 9933 is available, no extra
port configuration is necessary.
If port 9933 is not available, you must change the Recovery Manager TCP/IP port.
NOTE: The TCP/IP port used by Recovery Manager for Exchange must be the same on all
associated hosts in the centralized backup configuration.
1. Select an available port. The valid TCP/IP port range is 1024 to 65535.
2. To set a new port number, issue the RMExch portconfig command.
For example, to change the port number to 9950:
RMExch portconfig -h spotted -p 9950
3. Restart the Recovery Manager for Exchange Agent service.
4. Repeat these steps for all associated hosts in the centralized backup configuration.
Configuring the Database 23