HP 3PAR Application Software Suite for Microsoft Exchange Licenses - Manual (Page 29)

NOTE: If the Windows Open File Backup option in NetBackup is enabled, the NetBackup client
takes additional temporary read-only (RO) and read/write (RW) snapshots on your base volumes.
After the backup process is complete, Windows displays this event message: Target LUN is
not a 3PAR Virtual Volume.
To deactivate this function, disable the Windows Open File Backup in NetBackup.
NOTE: If you plan on backing up multiple Mailbox Databases using NetBackup and Recovery
Manager for Exchange, you need a different policy for each storage group that will be backed
up at the same time. For example, if the first backup of Mailbox Database One has not yet
completed, in order for the backup of Mailbox Database Two to be performed correctly by Recovery
Manager for Exchange and NetBackup, it must use a different policy.
For more information on installing Symantec NetBackup, see Symantec NetBackup documentation.
Configuring HP Data Protector
Requirements
•
HP Data Protector Software 6.2
•
Data Protector patch for omnidl (Patch # DPWIN_00514)
•
Each data list name (also known as the backup specification) must be unique across the entire
system
Setting Up the HP Data Protector Backup Specification
To use HP Data Protector with Recovery Manager, you must set up a default backup specification.
The backup specification specifies the default mount point and the necessary devices for tape
backup.
1.
Open the Data Protector GUI.
2. Select Backup
→Add Backup.
3. In the Create New Backup dialog box, select Blank_Filesystem_Backup and click OK.
4. Click Next (do not select any items).
5. Select the device that Data Protector is to use for backups.
6. Click Next until the Manual add... appears.
7. Click Manual add...
8. Select Windows filesystem and click Next.
9. Enter the appropriate client system, mount point, and description. HP recommends:
<server_used_as_backup_client> Client system
C: Mount point
default Description
NOTE: Recovery Manager uses this information only to create a backup template. Recovery
Manager does not use the actual data entered.
10. Click Next until the Finish button is enabled.
11. Save the backup specification.
When you issue the RMExch backup command with the -dl option, use the name with
which you saved the backup specification (e.g., DPbackup) as the value of the -dl option.
Configuring HP Data Protector 29