HP 3PAR Application Software Suite for Microsoft Exchange Licenses - Manual (Page 65)

RMExch portconfig
SYNTAX
RMExch portconfig -h <WindowsServer> [-p <portnumber>]
DESCRIPTION
The RMExch portconfig command will display or update the current port configuration for the
Recovery Manager for Exchange service and RMExch CLI for the specified windows server. When
only the -h argument is supplied, this command will list the current port number used by Recovery
Manager for the Windows server. When -p is supplied, the port will be updated to the argument
followed by -p. The default port used by Recovery Manager for Exchange is 9933. This should
be run against all of the production servers and backup servers. If you update the port setting on
a Windows server, you will need to restart the Recovery Manager for Exchange Agent Service
before connecting through that port.
PARAMETERS
The following options are supported:
•
-h <WindowsServer> - The name of the Windows server to display/update the port
configuration. If the server is in another domain, specify the FQDN.
•
-p <portnumber> - Optional. If specified, the command will update the port used. If
unspecified, the command will show the current configuration. Valid portnumber values are
1024 to 65535.
Examples
The following command will display the current port configuration for server Alpha.
RMExch portconfig -h Alpha
The following command will update the port configuration for server Alpha to 9950.
RMExch portconfig -h Alpha -p 9950
RMExch portconfig 65