Rear cover, Figure 1-4, Tape enclosure with a rear cover attached – HP Integrity NonStop H-Series User Manual
Page 21
Advertising

Product Overview
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
1-11
Rear Cover
Rear Cover
The rear cover of the tape enclosure comes already attached. See
.
Figure 1-4. Tape Enclosure with a Rear Cover Attached
The rear cover is shipped with eight pushbutton rivets. Two of the rivets are
already installed on the rear of the enclosure as shown in
. Two more
rivets will need to be installed after the cabling is complete. The other four rivets
are spares.
Rivets Installed
Extra Rivets
Advertising
This manual is related to the following products: