HP Integrity NonStop H-Series - Manual (Page 79)

Installing and Configuring the 9840FC Tape Drive for
the NonStop NS-Series Server
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
D- 7
Configuration
Configuration
Follow steps 1-12 to navigate through the tape drive’s menu configuration to view the
PORTNAME of the tape drive.
The purpose of viewing the tape drive’s PORTNAME is because it will be added to the
SCF configuration in step
12 on page D-11.
1. Make sure that the tape drive is powered on with the display showing one asterisk
as shown in Figure D-6 .
2. Press the Menu button four times until “View Cfg ? “ appears as shown in
Figure D-7 .
Figure D-6. Beginning of Tape Drive Menu