HP Integrity NonStop H-Series - Manual (Page 4)

Contents
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
ii
3. Configuring the Tape Drive for the NonStop S-
Series Server
3. Configuring the Tape Drive for the NonStop S-Series Server
Adding a Tape Drive 3-1
PMF CRU 3-1
Adding a Fibre Channel Converter 3-2
ServerNet/DA 3-2
PMF CRU 3-2
3-3
4. Operating the Tape Drive
Basic Tape Drive Operations 4-1
Powering On and Performing an IPL (Initial Program Load) 4-1
Taking the Tape Drive Online or Offline 4-1
Viewing the Tape Drive Configuration or Software Level 4-2
Cleaning the Tape Path 4-3
Tape Cartridge Operations 4-4
Write-Protecting a Cartridge 4-4
Loading a Tape Cartridge 4-5
Unloading a Tape Cartridge 4-6
Reclaiming (Reformatting) a Tape Cartridge 4-6
Formatting a Diagnostic Dump Tape 4-6
5. Maintaining the Tape Drive
Identifying Unrecoverable Tapes 5-1
Forcing a Diagnostic Dump 5-1
Forcing a Diagnostic Dump From the Operator Panel 5-2
Writing the Diagnostic Dump Tape to File 5-2
Maintenance Procedures 5-3
Recovering From a Stuck Tape Cartridge 5-3
6. Servicing the Tape Drive
Removing a Tape Drive From the Tape Enclosure 6-1
Adding a Tape Drive to the Tape Enclosure 6-2
A. Troubleshooting
Tape Drive Troubleshooting A-1
Power and Service Indicators A-1
Operator Panel Messages A-2
Fibre Channel Converter Troubleshooting A-9