HP Integrity NonStop H-Series - Manual (Page 5)

Contents
9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure— 524959-003
iii
B. Multimode Fiber Optic Cables
B. Multimode Fiber Optic Cables
62.5/125 Multimode Fiber-Optic Cables (676x-x) With SC Connectors B-2
62.5/125 Multimode Fiber-Optic Cables (F9x or F12x) B-2
F9x Cables With FDDI Connectors B-3
F12x Cables With FDDI Connectors and SC Connector B-3
SCSI Cables B-3
C. Product Specifications
Tape Enclosure Dimensions and Configurations C-1
Tape Drive Specifications C-3
9840 Tape Cartridge Specifications C-4
D. Installing and Configuring the 9840FC Tape Drive for the
NonStop NS-Series Server
Overview D-1
Installation D-3
Configuration D-7
Index
Safety and Compliance
Examples
Figures
Figure 1-1. Example of the Tape Drive Configuration 1-2
Figure 1-2. Operator Panel of the Tape Drive 1-5
Figure 1-3. Dimensions of the Enclosure 1-10
Figure 1-4. Tape Enclosure with a Rear Cover Attached 1-11
Figure 1-5. Two Stacked Tape Enclosures 1-12
Figure 1-6. Tape Enclosure on System Enclosure 1-13
Figure 1-7. System Enclosure on a Tape Enclosure 1-13
Figure 1-8. Stackable Enclosure 1-14
Figure 1-9. 9840 Tape Cartridge 1-17
Figure 2-1. Location of Power Switch, AC Power Receptacle, and Fibre Channel
Connectors
2-2
Figure 2-2. Location of Fibre Channel Connectors on the Tape Drive 2-3
Figure 2-3. Location of the GBIC on the Fibre Channel Converter 2-4
Figure 4-1. 9840 Tape Cartridge 4-5
Figure 5-1. Recovering From a Stuck Tape Cartridge 5-3