HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 125)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 125
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
Setting the Date and Time
This section describes how to set the date and time, and Network Time Protocol (NTP)
servers for the HP EFS WAN Accelerator. It includes the following sections:
‹ “Setting the Date and Time,” next
‹ “Setting NTP Servers” on page 126
Setting the Date
and Time You set the date, time, and time zone in the Date & Time - Set Clock page.
To set the date and
time 1. Click the Setup tab to display the Setup menu.
2. Click Date & Time to display the Date & Time - Set Clock page.
Figure 2-54. Date & Time - Set Clock Page
3. Use the controls to complete the configuration, as described in the following table.
Control Description
Set Time Using NTP Time
Synchronization Specify this option to enable NTP time synchronization. NTP synchronization enables
the time stamps for logs to match those of other computers that use NTP time
synchronization. This option is not required for proper system operation.
Set Time Manually Date. Specify the current date. Use the following format: YYYY/MM/DD.
Time. Specify the current time. Use the following format: HH:MM:SS.
Time Zone Select your time zone from the drop-down list. The default is GMT (Greenwich Mean
Time).