HP StorageWorks XP Remote Web Console Software - Manual (Page 46)

Performing XP Remote Web Console Operations 46
3-1-2-3 Status History Box
The Status History box (see Figure 3-11) is on the lower half of the Status tab.
Figure 3-11 Status History Box
The Status History box has the following features:
• Ref. Code displays the SIM Reference Code.
• Error Level displays the following error levels:
• Service: Does not require immediate attention, and is addressed during routine maintenance
• Moderate: Does not require immediate attention, and is addressed during routine maintenance
• Serious: Contact your HP account support representative.
• Acute: Contact your HP account support representative.
• Status displays either Complete (if the SIM has been deleted from the SVP) or Not Complete (if the error has
not been deleted).
• Date displays the date that the SIM occurred.
• Table 3-1 lists the environmental errors that can occur. Table 3-2 gives detailed information on the service
information message (SIM) severity levels and icons.
Table 3-1 Disk Controller and Disk Array Unit Error Conditions
Disk Controller Environment & Others Errors Disk Array Unit Environment & Others
Errors
Abnormal temperature Environment monitor failure Voltage alarm
Voltage alarm Environment monitor unmatched Voltage warning
Voltage warning Keylock pane connection error Forget-to-remove JP warning
AC warning Keylock resistor error Environment monitor failure
Forget-to-remove JP warning Abnormal power supply in SVP Environment monitor unmatched
DKCMAIN type unmatched S-SVP failure
Router failure Trial term expiration
Continuous Access XP / TrueCopy -
S/390® failure Business Copy XP / ShadowImage -
S/390® copy abnormal end
Flex Copy XP copy abnormal end