HP StorageWorks XP Remote Web Console Software - Manual (Page 62)

Performing XP Remote Web Console Operations 62
Figure 3-21 Control Panel, Set Environment Tab
The Set Environment tab of the Control Panel has the following features:
• Maximum number of connections - Sets the maximum number of XP Remote Web Console users that can
concurrently connect to the same subsystem.
NOTE: You cannot change this value from the XP Remote Web Console. Contact your HP account
support representative if you want to change the default setting.
• Maximum number of user entries - Sets the maximum number of user entries that can be registered in the
user account list of a subsystem.
NOTE: You cannot change this value from the XP Remote Web Console. Contact your HP account
support representative if you want to change the default setting.
• Number of current user entries - Shows the number of user entries currently registered in the user account
list.
• Automatic distribution of the Java™ plug-in - Java Runtime Environment (JRE™) is required to use XP Remote
Web Console. If a computer that is being used as an XP Remote Web Console does not have JRE™, the
SVP can distribute and install the appropriate JRE™ automatically when the user logs on to the SVP.
• The default is JRE1.3.1_01. You can select JRE1.3.1_01 or JRE1.4.1 from the drop-down list.
NOTE: You cannot disable this parameter.
• RMI™ time-out period - If the user cannot access the SVP for a certain period of time because of a network
error, the RMI™ time-out logs the user off of the SVP. This has the following parameters:
• Specify 1 minute, 5 – 60 minutes in 5-minute increments, 70 to 120 minutes in 10-minute increments, or
One day (24 hours). The default is one minute.
• Specify NO to disable this parameter.
NOTE: If you specify NO as the value of the RMI™ time-out period, the user is not logged off
automatically when an error occurs. This might prevent that user from logging in again. This setting is
not recommended under ordinary circumstances.