HP StorageWorks XP Remote Web Console Software - Manual (Page 54)

Performing XP Remote Web Console Operations 54
Table 3-4 Operation and Terms Displayed in Audit Log File
Pane Tab Operation Output of Audit Log File
Function Operation
UNLOCK_LOGOUT
Note : This log information indicates
the processing of the release of the
Modify authority by the system during
logout.
Modify LOCK
View UNLOCK
Note : This information is output
regardless of the status of the Modify
mode.
Closing with the × button of
the web browser without any
processing. UNLOCK_LOGOUT
Note : If the session is cut off while the
processing is in progress, this
information is output as the
processing has finished.
Timeout of Modify UNLOCK_TIMEOUT
Network failure, termination
of the web browser
processing from the task
manager, and so on. UNLOCK_TIMEOUT
Note : As the connection from the
client is disconnected and the
processing is ended without the
demand of logout, the timeout occurs
in the server side and the log
information is output.
Note 1: When two or more settings of the same type are applied to the subsystem at one time, the log
information is output as one entry.
Note 2: When one or more settings that are applied at one time end abnormally, the output log information will
be Error, not Warning.
Note 3: When two or more LUN Manager operations are performed, the following parameters apply:
• When two or more operations are performed on one target and then the Apply button is clicked, the log
information is output as one entry.
• When two or more settings are applied at one time, the log information is output according to the priority
shown in Table 3-5. If the priority is the same, the log information is output in the order of the operations
performed.