HP StorageWorks XP Remote Web Console Software - Manual (Page 80)

Configuration File Loader 80
All of the formatting requirements in Table 5-1 must be satisfied.
Table 5-1 Spreadsheet File Formatting Requirements
Item Requirements
File type Text file
File name Extension must be “.spd”.
Maximum number of letters for the file name is 32 including the extension.
The following symbols cannot be used for the file name:
\ / : , ; * ? “ < > | and space.
File path must be under 255 letters.
Maximum number of rows in a
spreadsheet 70,000 rows
End-of-line character Linefeed code must be put in the end of each row.
Maximum number of letters in a row Maximum number of letters in a row is 128 bytes, including the linefeed code at the
end.
Case-sensitivity Settings are not case-sensitive, except for WWN and host group.
Format (for more information on the
required format, see section 5-3) The following parameters should be written in hexadecimal numbers:
Host group (host storage domain) ID, host mode, LUN, CU, LDEV.
Tab codes and a series of spaces before or after comma are ignored.
5-2-2 Spreadsheet Components
The spreadsheet consists of the following components:
• Spreadsheet Declaration (see section 5-2-2-1)
• Function tags (see section 5-2-2-2)
• Configuration definition(s) (see section 5-2-2-3)
• Comments (see section 5-2-2-4)
5-2-2-1 Spreadsheet Declaration
The spreadsheet declaration is required, and is written at the beginning of the spreadsheet. Certain parts of the
declaration will have already been written in the exported current spreadsheet. If the declaration line is incorrect,
an error occurs and the spreadsheet file will be rejected.
NOTE: The spreadsheet declaration line is not case-sensitive.
• Format (variables are shown in italics):
#!Version Version number,Program Product,Process mode
• Example:
#!Version 03_02_00,LUN,Change