HP StorageWorks XP Remote Web Console Software - Manual (Page 86)

Configuration File Loader 86
5-3-3 Port Settings
The [Port] tag allows you to set the port information and the change the security switch (Secure Manager XP) to
ON or OFF. You can change the [Port] tag definitions, but may not add or delete them.
You cannot change the NAS settings using the spreadsheet. However, the current NAS settings are commented
on the exported spreadsheet (the rows start with “#$”).
Table 5-5 lists the items and values available for the [Port] tag.
NOTE: When you change the port settings, you may not change the PCB mode if it is either High Speed or
High Speed (2 Port). Attempting to do so will cause an error.
If LUN security is set to OFF, there are restrictions on certain operations, as described in Table 5-6.
Table 5-6 Operations Affected By LUN Security Status
LUN Security Status Function Type Operation
ON Æ OFF ON Æ OFF OFF Æ ON OFF Æ ON
Adding Yes Yes Yes No
Changing the name Yes Yes Yes No
Changing the host mode Yes Yes Yes No
Changing the host mode for Group
00 Yes Yes Yes Yes
Deleting Yes Yes Yes Yes
Host group
Deleting the settings for Group 00
(see NOTE below) Yes Yes Yes Yes
Adding Yes Yes Yes No
Changing Yes Yes Yes No
WWN
Deleting Yes Yes Yes Yes
Adding Yes Yes Yes No
Changing Yes Yes Yes No
LUN
Deleting Yes Yes Yes Yes
NOTE: If WWN and LU path definition under the Group 00 are deleted, the host mode becomes 00 and the
group name is changed to the default, which is the “port name-host group number”.
Table 5-5 Available [Port] Tag Configuration Values
Column Item Available Values
1st , 8th (Index) Port Set one of the following:
1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R,
2A, 2B, 2C, 2D, 2E, 2F, 2G, 2H, 2J, 2K, 2L, 2M, 2N, 2P, 2Q, 2R,
3A, 3B, 3C, 3D, 3E, 3F, 3G, 3H, 3J, 3K, 3L, 3M, 3N, 3P, 3Q, 3R,
4A, 4B, 4C, 4D, 4E, 4F, 4G, 4H, 4J, 4K, 4L, 4M, 4N, 4P, 4Q, 4R,
2nd, 9th Security Switch (Secure
Manager XP) ON or OFF
3rd, 10th AL-PA Set with hexadecimal numbers in one or two digits.
4th, 11th Fabric ON or OFF
5th, 12th Connection FC-AL or P to P
6th, 13th Channel Speed Set one of the following:
• 1, 2, or Auto