HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 199)

Description Recommended action
22 EMBEDDED I/O BUFFER OVERFLOW
To continue press OK
Too much data was sent to the embedded
HP Jetdirect print server. Press the OK button to print the transferred
data. (Some data might be lost.)
Check the host configuration. If the message
persists, contact HP support. See
Customer
support on page 246 .
22 USB I/O BUFFER OVERFLOW
To continue press OK
The product's USB buffer has overflowed. Press the OK button to print the transferred
data. (Some data might be lost.)
Check the host configuration. If the message
persists, contact HP support. See
Customer
support on page 246 .
40 EIO X BAD TRANSMISSION
To continue press OK
The connection between the product and the
EIO card in the specified slot has been
broken. Press the OK button to clear the error
message and continue printing.
Try to reinstall the EIO card.
40 EMBEDDED I/O BAD TRANSMISSION
To continue press OK
A temporary printing error has occurred. Press the OK button to clear the error
message. (Data will be lost.)
41.3 UNEXPECTED SIZE IN TRAY <X>
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
The product detected a different paper size
than expected.
The prompt to use another tray is displayed
only if another tray has paper loaded.
Load the tray with the size and type of paper
indicated, or use another tray.
41.5 UNEXPECTED TYPE IN TRAY <X>
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
The product detected a different paper type
than expected.
The prompt to use another tray is displayed
only if another tray has paper loaded.
Load the tray with the size and type of paper
indicated, or use another tray if available.
41.7 ERROR
To continue press OK
A temporary printing error has occurred. Try using different paper.
If the error does not clear, turn the product off
and then on.
48.01 TRANSFER UNIT ERROR The transfer belt has dislocated during
printing. Turn product off then on.
If the message persists, remove and reinstall
the transfer unit. Contact HP support if the
message appears after reinstalling the
transfer unit. See
Customer support
on page 246 .
Table 10-1 Control-panel messages (continued)
ENWW Interpret control-panel messages 185