HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 40)

Item Sub-item Sub-item Values Description
EDGE CONTROL OFF
LIGHT
NORMAL*
MAXIMUM
The Edge Control setting determines how
edges are rendered. Edge control has two
components: adaptive halftoning and
trapping. Adaptive halftoning increases
edge sharpness. Trapping reduces the
effect of color-plane misregistration by
overlapping the edges of adjacent objects
slightly.
● OFF turns off both trapping and
adaptive halftoning.
● LIGHT sets trapping at a minimal level,
and adaptive halftoning is on.
● NORMAL is the default trapping
setting. Trapping is at a medium level
and adaptive halftoning is on.
● MAXIMUM is the most aggressive
trapping setting. Adaptive halftoning is
on.
AUTO CLEANING OFF*
ON
When auto-cleaning is on, the product prints
a cleaning page when the page count
reaches the CLEANING INTERVAL setting.
CLEANING
INTERVAL 500*
1000
2000
5000
10000
20000
Specify the number of pages that are printed
before a cleaning page is automatically
printed. This item appears only when the
AUTO CLEANING option is set to ON.
AUTO CLEANING
SIZE LETTER*
A4
Specify the paper size that is used to print
the cleaning page. This item appears only
when the AUTO CLEANING option is set to
ON.
CREATE CLEANING
PAGE Prints a page of instructions for cleaning
excess toner off the pressure roller in the
fuser.
NOTE: This option is available only for the
HP Color LaserJet CP4025n printer and the
HP Color LaserJet CP4525n printer.
PROCESS
CLEANING PAGE Allows you to create and process a cleaning
page for cleaning the pressure roller in the
fuser. When the cleaning process runs, a
cleaning page is printed. This page can be
discarded.
NOTE: For the HP Color LaserJet
CP4025n printer and the HP Color LaserJet
CP4525n printer, you must first select the
CREATE CLEANING PAGE option.
26 Chapter 2 Control panel menus ENWW