HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 39)

Item Sub-item Sub-item Values Description
ADJUST PAPER
TYPES A list of paper types
displays. PRINT MODE
RESISTANCE
MODE
HUMIDITY MODE
PRE-ROTATION
MODE
FUSER TEMP
MODE
PAPER CURL
MODE
A list of print modes
displays. Configure the print mode that is associated
with each media type.
RESTORE MODES Use this feature to return all paper type-
mode settings to the factory-default settings.
OPTIMIZE A list of available
options displays. Allows you to optimize various print modes
to address print quality issues.
RESTORE OPTIMIZE Use this feature to return all the settings in
the OPTIMIZE menu to the factory-default
values.
QUICK CALIBRATE
NOW Performs a partial product calibration.
FULL CALIBRATE
NOW Performs all product calibrations.
DELAY
CALIBRATION AT
WAKE/POWER-ON NO
YES*
This menu controls the timing of the
calibration when the product wakes up or is
turned on.
● Select NO to have the product calibrate
immediately when it wakes up or is
turned on. The product will not print any
jobs until it finishes calibrating.
● Select YES to enable a product that is
asleep to accept print jobs before it
calibrates. It may start calibrating
before it has printed all the jobs it has
received. This option allows quicker
printing when coming out of sleep
mode or when you turn the product on,
but print quality might be reduced.
NOTE: For best results, allow the product
to calibrate before printing. Print jobs
performed before calibration might not be of
the highest quality.
RESOLUTION Image REt 3600*
1200x1200 dpi
Sets the resolution at which the product
prints. The default value is Image REt
3600. Try the 1200x1200 dpi setting to
improve printing for detailed line work or
small text.
ENWW Control panel menus 25