X values, Enww interpret control-panel messages 187 – HP Color LaserJet Enterprise CP4525 Printer series User Manual

Page 201

Advertising
background image

Description

Recommended action

56.X ERROR

To continue turn off then on

A temporary printing error has occurred.

Turn the product off, and then turn the
product on.

If the message persists, contact HP support.
See

Customer support on page 246

.

57.XX ERROR

To continue turn off then on

A temporary printing error has occurred.

Turn the product off, and then turn the
product on.

If the message persists, contact HP support.
See

Customer support on page 246

.

58.XX ERROR

To continue turn off then on

A temporary printing error has occurred.

Turn the product off, and then turn the
product on.

If the message persists, contact HP support.
See

Customer support on page 246

.

59.BO CLEANING MOTOR ERROR

REPLACE TONER COLLECTION UNIT

This message appears for one of the
following reasons:

The cleaning motor is stuck.

The toner collection unit is full.

The chute at the top of the toner
collection unit is clogged.

Replace the toner collection unit. See

Replace the toner collection unit
on page 167

.

59.XY ERROR

To continue turn off then on

A temporary printing error has occurred.

Turn the product off, and then turn the
product on.

If the message persists, contact HP support.
See

Customer support on page 246

.

60.X ERROR

To continue turn off then on

The tray specified by X is not lifting correctly.

X values

2 = Tray 2

3 = Tray 3

Follow the instructions on the product control
panel.

62 NO SYSTEM

To continue turn off then on

The product has an internal problem.

Turn the product off and then on.

If the message persists, contact HP support.
See

Customer support on page 246

.

66.XY.ZZ SERVICE ERROR

Check cables and turn off then on

The external paper-handling controller has
detected a failure.

Turn the product off and then on.

If the message persists, contact HP support.
See

Customer support on page 246

.

68.X PERMANENT STORAGE FULL

To continue press OK

The product NVRAM is full. Some settings
saved in the NVRAM might have been reset
to the factory defaults. Printing can continue,
but some unexpected functions might occur
if an error occurred in permanent storage.

X values

0 = Internal memory

1 = Removable disk

Press the

OK

button to clear the message. If

the message is not cleared, turn the product
off, and then turn the product on.

If the message persists, contact HP support.
See

Customer support on page 246

.

Table 10-1

Control-panel messages (continued)

ENWW

Interpret control-panel messages 187

Advertising
This manual is related to the following products: