Envelopes jam or will not feed in the product, Output is curled or wrinkled – HP Color LaserJet Enterprise CP4525 Printer series User Manual

Page 235

Advertising
background image

Envelopes jam or will not feed in the product

Envelopes jam or will not feed in the product

Cause

Solution

Envelopes are loaded in an unsupported tray. Only Tray 1 can
feed envelopes.

Load envelopes into Tray 1.

Envelopes are curled or damaged.

Try using different envelopes. Store envelopes in a controlled
environment.

Envelopes are sealing because the moisture content is too
high.

Try using different envelopes. Store envelopes in a controlled
environment.

Envelope orientation is incorrect.

Verify that the envelope is loaded correctly.

This product does not support the envelopes being used.

Refer to the HP LaserJet Printer Family Print Media Guide.

Tray 1 is configured for a size other than envelopes.

Configure Tray 1 size for envelopes. If the envelope is a
custom size, configure Tray 1 paper type to ENVELOPE.

Output is curled or wrinkled

Output is curled or wrinkled

Cause

Solution

Paper does not meet the specifications for this product.

Use only paper that meets the HP paper specifications for this
product.

Paper is damaged or in poor condition.

Remove paper from the input tray and load paper that is in
good condition.

Product is operating in an excessively humid environment.

Verify that the printing environment is within humidity
specifications.

You are printing large, solid-filled areas.

Large, solid-filled areas can cause excessive curl. Try using a
different pattern.

Paper used was not stored correctly and might have absorbed
moisture.

Remove paper and replace it with paper from a fresh,
unopened package.

Paper has poorly cut edges.

Remove paper, flex it, rotate it 180 degrees or turn it over, and
then reload it into the input tray. Do not fan paper. If the problem
persists, replace the paper.

The specific paper type was not configured for the tray or
selected in the software.

Configure the software for the paper (see the software
documentation). Configure the tray for the paper, see

Load

paper trays on page 90

.

The paper has previously been used for a print job.

Do not re-use paper.

ENWW

Solve paper-handling problems 221

Advertising
This manual is related to the following products: