HP 3PAR Application Software Suite for Oracle - Manual (Page 149)

MESSAGE
3PAR1104: ERROR: The number of virtual copies has exceeded the maximum of <value>.
REASON
The maximum number of virtual copies specified in configuration file is reached.
SOLUTION
Either remove one or more virtual copies, or increase the number in the configuration file by running
rmora_config
or the GUI to modify the configuration. If you choose to remove the oldest virtual
copy when maximum number is reached during configuration, Recovery Manager for Oracle will
automatically remove the oldest virtual copy.
MESSAGE ID
1105
SYMBOLIC NAME
RMO_ERROR_DISCOVER_DEV
MESSAGE
3PAR1105: ERROR: Could not discover devices used by database <name>.
REASON
Recovery Manager for Oracle failed to retrieve the devices used by datafiles and/or archive log
destinations.
SOLUTION
Make sure datafiles and archive log destinations are on separate 3PAR volumes and make sure
the file system type is supported by Recovery Manager for Oracle (refer to the HP 3PAR configuration
matrix). Check log files from both the database server and the backup system. If none of the above
reveals the failure reason, contact customer support for further investigation.
MESSAGE ID
1106
SYMBOLIC NAME
RMO_ERROR_OPEN_DEVICE
MESSAGE
3PAR1106: ERROR: Could not open device <device ID>.
REASON
System call open() failed for the specified device.
SOLUTION
Check if the device exists and has correct permissions. Contact customer support for further
investigation.
MESSAGE ID
1107
SYMBOLIC NAME
RMO_ERROR_IOCTL
MESSAGE
3PAR1107: ERROR: Could not perform scsi inquiry to device <device ID>.
REASON
The system call ioctl failed for the specified device.
SOLUTION
149