HP 3PAR Application Software Suite for Oracle - Manual (Page 160)

When Recovery Manager for Oracle tries to execute the command createvlun, it has to make
sure there is no other identical operation going on to take the next available LUN away. This is
an exclusive operation. The lock file is in /etc/3par/solutions/lock/.vlun.
SOLUTION
Make sure there is no other createvlun process running. If the lock file is not cleaned up by
previous failed operation, manually remove it.
MESSAGE ID
1157
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_ROLLBACK_TASK
MESSAGE
3PAR1157: ERROR: Could not retrieve rollback tasks information from the HP 3PAR storage system.
REASON
After Recovery Manager for Oracle issues the command to rollback a virtual copy to its base
volume(s), it keeps checking the completed tasks to make sure the rollback operation is finished.
In this process, the InForm CLI command showtask is used to trace the task promote_sv status.
This error occurs when there is no promote_sv task.
SOLUTION
Make sure the HP 3PAR storage system is working properly. Contact customer support for further
investigation.
MESSAGE ID
1158
SYMBOLIC NAME
RMO_ERROR_ROLLBACK_TASK_NOTFOUND
MESSAGE
3PAR1158: ERROR: Could not find rollback task with task ID <task ID>.
REASON
During the process of rmora_rollback, Recovery Manager for Oracle checks the status of the
promotesv
tasks periodically. The error happens when Recovery Manager for Oracle fails to
find the specified task.
SOLUTION
Make sure the HP 3PAR storage system is working properly. Contact customer support for further
investigation.
MESSAGE ID
1159
SYMBOLIC NAME
RMO_ERROR_ROLLBACK_SV
MESSAGE
3PAR1159: ERROR: The rollback process for the Virtual Copy volume <volume name> has failed.
REASON
During the process of rmora_rollback, Recovery Manager for Oracle keeps checking the status
of the promotesv tasks. The error happens when the status for the specified volume is neither
done or active.
SOLUTION
160 Troubleshooting